Help > PCB

The Z20X PCB is a 4-layer board with size 181 x 108mm, exactly the same as the LCD panel module, and made in such way so it plugs directly into the connector on the bottom side of the board so the two boards form a “sandwich” assembly.

The minimum trace width and clearance on the PCB are 0.2mm (8mil). The PCB uses only one size normal full-stack via with 0.3mm hole. This lack of “high-tech” features make the board robust and easy for manufacturing even by the cheapest factories.

A 3D Step file of the assembled Z20X PCB is available to simplify mechanical design work for the Z20X system.

PCB gerbers can be downloaded as well and sent for manufacturing.



Note: Prototype version PCB